0 Samsung Galaxy Note® (AT&T) Android 4.1.2 Jelly Bean Upgrade

Android™ 4.1.2 Jelly Bean upgrade is available for the Samsung Galaxy Note® (AT&T) (SGH-i717). Android 4.1.2 Jelly Bean, is the fastest and smoothest version of Android yet. Jelly Bean improves on the simplicity and beauty of Android 4.0, and introduces a new Google search experience on Android.

Back Up Your Information

This software update was designed to apply an update to the operating system of the device while leaving certain types of user data intact, including pictures, videos, and contacts. To be safe, it is best practice to always back up all data in the event that your information is lost.

Please refer to the Kies Backup/Restore FAQ to learn more about backing up your personal data.

Note: Your SIM card and any external microSD™ memory card may remain installed during this update. You may remove either or both prior to beginning the process, if desired. Remember to re-install both after the update process has completed.

How Do I Check My Current Software Version?

1. From any home screen touch Menu > Settings > About Phone.
2. Scroll to the bottom and look for Baseband Version. It should be I717UCLA1,I717UCLF6, or I717UCMB4 before updating. It will be I717UCMD3 after the update.

What Will This Update Do?

This update will address the following:

OS upgrade to Android 4.1.2 (Jelly Bean)

• Google Now with enhanced voice activation
• Popup note: Allows user to instantly write down directions, phone numbers, and other information while on a call.
• Popup Video and Browser: Allows user to watch video or browse the web while performing other tasks.
• Photo note and frame: Allows user to write down notes on the front and back of a photo.
• Easy clip: Allows user to crop an image from any screen and save or share easily.
• Paper artist: Provides an emotional & aesthetic photo editing experience.
• Handwriting on S planner and email: Handwrite memos or send handwritten notes via email.
• Enhanced S note: More effects & templates were added.
• Improved Call Quality
• Improved Keyboard

How Do I Get This Update?

This update is available through Windows and Mac computers using the Samsung Kiessoftware application.

Samsung Kies

If you have not already installed Samsung Kies on your computer, click the button below to go to the Samsung Kies page.

After you download and install Kies for your platform, switch back to this article and follow the appropriate steps below.

Note: The time to upgrade your device will vary. Dependent upon your computer and network connection, you may experience some idle time or slow response in Kies. Do not close any programs on your PC, disconnect or turn off your device until the upgrade process is complete.

Requirements

• Windows Operating System
  • Microsoft® Windows XP, Vista, Windows 7, Windows 8 (Windows 8 RT is not supported)
  • CPU: Intel Pentium 1.8 GHz or greater (Intel Core 2 Duo 2GHz recommended)
  • Memory (RAM): 1GB (Recommended)
  • Hard Drive Space: At least 500MB
  • Screen Resolution: 1024 x 768
  • Required software: Microsoft .Net Framework v3.5 SP1 or later, Windows Media Player 11 or later DirectX v9.0 or later,
• MacOS
  • OSX 10.5 and up
  • Processor: 1.8GHz
  • Memory (RAM): 512MB Free
  • Hard Drive Space: At least 100MB

• Fully Charged Battery

Note: The upgrade process may not complete if the charge level is less than 50 percent.

• USB Data Cable (Included In Retail Box)

  Note: This is the same cable used to charge your device.

How Do I Update My Samsung Galaxy Note® (AT&T)?

1. Start Samsung Kies, or if you have downloaded Samsung Kies, launch the installer and allow Kies to install on your system. If you are prompted to reboot the system, do so before proceeding.
2. Connect your device to your PC or laptop using the supplied USB cable.
3. Ensure that Kies recognizes your device by looking in the upper section of the left-bar navigation menu. Your device should be listed.
4. Once Kies recognizes the device you will see the following pop-up.

Firmware versions shown will vary.

5. Click Update.
6. Read through the Caution pop-up and, if you agree, click to populate the I have read all of the above information checkbox.
7. Read the Allow saving of information statement and select Allow saving orProceed without saving and then click Start upgrade.
8. Kies will begin downloading firmware upgrade components from Samsung servers. This will take a few minutes depending on the speed of your Internet connection.

Note: The time to upgrade your device will vary. Dependent upon your computer and network connection, you may experience some idle time or slow response in Kies. Do not close any programs on your PC, disconnect or turn off your device until the upgrade process is complete.

9. After a few minutes, Kies will then begin transferring the firmware binary to the device.

During the upgrade process, you will see the Android logo on your devices screen.

On your computer, you will see the Kies screen below.

10. After a few more minutes, the firmware upgrade will be completed.

Versions shown will vary.

11. Click OK. You can now disconnect your device from the PC. Once the device has rebooted it will be ready to use.

Kies Recovery

Kies can help you restore the Samsung Android™ operating system (OS), sometimes referred to as your device's firmware, to your device. If your device fails during an update and cannot be recovered using emergency firmware recovery, or you have installed a custom version of the Android OS on your device, you can reload the latest version of the Android OS to your device.

Learn more about Kies recovery.

Personal Data Restoration From Kies

If you performed a data backup from your device to Kies prior to performing the update, you can now restore that data back to the device under the new Jelly Bean operating system.

Refer to the Kies Backup/Restore FAQ to learn how to restore your personal data.

Common Questions

General Questions:

• Does the I717UCMD3  upgrade contain an operating system upgrade to Android 4.1.2 (Jelly Bean)?
  • Yes. I717UCMD3  contains the Android 4.1.2 Jelly Bean upgrade.
• Can I upgrade directly to I717UCMD3 from any previous released software for the Samsung Galaxy Note® (AT&T) (SGH-i717)
  • Yes, Kies will automatically upgrade to I717UCMD3from I717UCLA1, I717UCLF6, or I717UCMB43 previously released official software versions.
• Will Kies work on my Mac?
  • Yes,. Mac OS Minimum Requirements are:
    • OSX 10.5 and up
    • Processor: 1.8GHz
    • Memory (RAM): 512MB Free
    • Hard Drive Space: At least 100MB
• Can I take my phone to an AT&T store for the upgrade?
  • No, stores do not have the proper tools to perform the software upgrade.
• What are the capabilities of Kies?
  • You can manage music, movies, and photos. Manage music, movies and photos, backup precious contacts and calendars; or download apps and podcasts and automatically upgrade device firmware. Kies conveniently syncs your life across all your devices.

   Troubleshooting Kies Connection

Try these steps before using the Kies connection troubleshooter.

• Disconnect the device and data cable from your computer, then reconnect.
• If you are connecting the USB cable to a USB hub, try connecting the cable directly to your computer.
• Close Kies and reopen the application.
• Reboot your computer and your device.

If you are still having trouble connecting to Kies, run the connection troubleshooting function:

Note: This function is available only in Kies for Windows^®. If you are using a Mac^®, clickTools > Install driver to install the necessary drivers for your Samsung device.

1. Open Kies and click Tools > Troubleshoot connection error.
2. Click Start.
   
3. When the troubleshooter attempts to reinstall the driver, click Yes on any installation warning messages.
4. After the troubleshooter is finished, click Complete and reconnect your device.
   

If you are still having connecting issues please try the following:

1. Disconnect the device from computer. Power cycle your device by holding the power button until your device turns off (8 to10 seconds), your device will now restart. After the restart, reconnect your device to the PC.
2. Please remove all previously installed Samsung software or drivers.

Click the appropriate Windows version for information to uninstall software and drivers from your Windows PC.

Windows XP

Windows Vista

Windows 7

2. Make sure you are using an official Samsung USB cable.
3. Try a different USB port.
4. Reboot computer after installing Kies.
5. Uninstall & Reinstall Kies.

 

Komentar →